The Control 19CST uses advanced proprietary technologies to produce powerful bass from a low profile in-ceiling design.
Unique Nested Chamber™ design and Linear
Component: Long excursion 200 mm (8 in) driver.
Packaged with grille, backcan and tile rails for fast
Simple installation and wire connection method.
Frequency Range
42 Hz - 200 Hz
Power Rating
See transformer taps
Transformer Taps
75W, 30W, 15W (& 7.5W @ 70V)
Coverage Angle
180° conical
Maximum SPL (1m)
108 dB (70V/100V, center of ceiling)
114 dB (70V/100V, near corner)
Nominal Impedance
8 ohms
Drivers
200 mm (8.0 in) subwoofer
Enclosure Material
Backcan: Formed steel Baffle/Rim: Medium impact polystyrene, fire rated UL94V-0
Input Connectors
Removable locking connector with screw-down terminals.
Safety Agency
Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 & NFPA 70. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
Outside Dimensions (H x Dia)
345 x 345 mm (13.6 x 13.6 in) 318 mm (12.5 in) front of ceiling tile to back of backcan
Ceiling Cutout Size
305 mm (12.0 in) diameter (cardboard cutout template included)
Net Weight (each)
6.3 kg (14 lb)
Shipping Weight (pair)
14.3 kg (32 lb)
Included Accessories
C-shaped support backing plate 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles) Cutout template Paint shield Removable locking wiring connector
Sensitivity
95 dB SPL in ceiling near corner,
89 dB in center of ceiling
