Giỏ hàng

00đ

  • Không có sản phẩm trong giỏ hàng!

DCi 4|1250N
DCi 4|1250N
DCi 4|1250N

DCi 4|1250N

0 đánh giá
Four-channel, 1250W @ 4Ω Power Amplifier with BLU Link, 70V/100V
Hãng sản xuất:
Mã sản phẩm: DCi 4|1250N
  • ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.
  • NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
  • PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
  • DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
    • LevelMAX Limiters
    • Input/Output EQ
    • Crossover
    • Delay
    • Matrix Mixer
    • Speaker Line Monitoring
Output Channels 4
Frequency Response (8Ω, 20Hz - 20kHz) ±0.25dB
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%
Damping Factor (20Hz to 100Hz) >1500
Load Impedance (Stereo/Dual Mode) 2Ω - 16Ω; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M) 47
Required AC Mains (±10%) 100V-240V ~ 50/60Hz
Power Connector 20A IEC
Dimensions (W x H x D) 483 mm x 89 mm x 432 mm
19 in x 3.5 in x 17 in
Weight 13.60 kg (30 lbs)

Viết đánh giá

Lưu ý: không hỗ trợ HTML!
    Tồi           Tốt